Solar Metering Pumps

One Quarter Inch Plunger

  • Simplex Flows to 29 QPD (7 GPD)
  • Duplex Flows to 58 QPD (14 GPD)
  • 1/15 HP Motor operating pressures to 2,000 PSI
  • 0.22 HP Motor operating pressures to 5,000 PSI

Three Eighths Inch Plunger

  • Simplex Flows to 66 QPD (17 GPD)
  • Duplex Flows to 132 QPD (34 GPD)
  • 1/15 HP Motor operating pressures to 850 PSI
  • 0.22 HP Motor operating pressures to 2,500 PSI

One Half Inch Plunger

  • Simplex Flows to 117 QPD (29 GPD)
  • Duplex Flows to 234 QPD (58 GPD)
  • 1/15 HP Motor operating pressures to 500 PSI
  • 0.22 HP Motor operating pressures to 1,250 PSI

Ceramic Coated Plungers

  • One Piece Plunger Seal
  • Direct Cam Drive, No Crosshead
  • Cartridge Pump Head Assy
  • Methanol Temperature Control

Solar Pump Housing and Head OpenPump Head Assembly

  • Direct cam drive
  • No crosshead with pinned connections
  • No weak points for breakage
  • No alignment issues
  • Spring return uses less energy

Pump Head AssemblyPump Head Assembly

  • Utilizes plunger head assembly
  • One piece Uniseal or O-ring with back up ring plunger seal
  • Ease of plunger and seal replacement
  • Optional seal material available
  • Rapid change in plunger sizes
  • 1/4, 1/2, and 3/8 inch plunger options
  • Ceramic coated plungers
  • Easy field maintenance/replacement
  • Field serviceable

Solar Pump, Panel, and Control Box OpenTimer

  • Timer can be operated in continuous run mode or in choice of multiple intermittent timed cycles for H2S inhibitor applications etc.
  • Methanol temperature control available to activate pump at 45° F and turn pump off at 55° F
  • RS 485 9 pin serial port for customer monitoring interface
  • Two motor options 1/15th HP for pressures below 2,000 PSI and 0.22 HP for pressures above 2,000 PSI, provides for more efficient energy usage

Stroke Length Adjuster

Timer
Sidewinder Pumps introduces our new Stroke Length Adjuster for AC / Solar Pump lines. The innovative design allows for 0-100% adjustment while pump is running. This provides accurate flow control options especially on duplex pumps with different size plungers. Setting the Stroke Adjuster to 0 will allow maintenance to be done to that pump without having to take pump out of service. The Stroke Adjuster can be retrofitted to existing pumps.

Additional information

Weight 270-36.0 lbs